Custom stone and brick for St. Cloud, Orlando and Central FloridaCustom stone and brick in Central Florida
All American Masonry & Concrete
Mason laying a herringbone firebrick back in a masonry fireplace firebox on a concrete block base, masonry vs prefab fireplace
Call (407) 702-4316 Request a Quote

Masonry vs Prefab Fireplace: Which Belongs in a Florida Home?

A masonry fireplace is built on site from block, firebrick and real brick or natural stone. It stands on its own footing and vents through a masonry chimney. A prefab fireplace is a factory-built unit, tested and listed as one product. It is framed into a wall and vents through a factory-built chimney.

Prefab fits when cost comes first, since its ranges in the cost guides top out lower. Masonry fits a new custom home or an addition, where the footing and chimney go on the plans early. In Florida, an indoor wood-burning fireplace is the less common request. When you do want one, we build custom masonry indoor fireplaces alongside your builder.

How do masonry and prefab fireplaces compare?

The code sections below come from the Florida Building Code, Residential.

Masonry fireplacePrefab (factory-built) fireplace
How it is madeBuilt on site: a block core, a firebrick firebox and a brick or natural stone faceMade in a factory as one unit, then framed into a wall
Code pathSection R1001, the masonry fireplace rulesListed and labeled, tested to UL 127, installed per its listing (R1004.1)
Weight and footingHeavy; a concrete or solid masonry footing at least 12 inches thickSet in place as its listing says; the footing rule is written for masonry fireplaces
Clearance to framingAt least 2 inches at the front and sides, 4 inches at the back (R1001.11)Set by the unit’s listing
ChimneyA lined masonry chimney, at least 3 feet above the roof where it passes throughA listed factory-built chimney, installed and capped as the maker’s instructions say (R1005.1)
FireboxA firebrick lining at least 2 inches thick, at least 20 inches deepBuilt into the factory unit and tested with it
HearthAt least 4 inches thick; the extension reaches 16 inches out and 8 inches to each sideInstalled per the listing, and easy to tell apart from the floor (R1004.2)
FinishReal clay brick or natural stone, brick arches, a herringbone firebrick backA face around the unit, as its listing allows
UpkeepBlock and brick do not rust or rot; firebrick is made for the heatFollow the maker’s instructions for the unit and its chimney
Market cost$3,500 to $5,600 in one guide; $10,000 or more for a mason-built brick fireplace$2,000 to $3,000 for a prefab brick fireplace; $3,000 to $8,000 for a prefab wood-burning unit

How is a masonry fireplace built?

A masonry fireplace goes up one course at a time. Ours start with a concrete block core. The firebox gets a firebrick lining, since firebrick is made for the heat. The face is real clay brick or natural stone.

Section R1001 of the code sets the masonry rules. The firebox must be at least 20 inches deep, with firebrick at least 2 inches thick. The hearth is at least 4 inches thick. Its extension reaches 16 inches in front of the opening and 8 inches past each side. For openings of 6 square feet or more, those become 20 and 12 inches.

All that masonry is heavy. The code calls for a footing of concrete or solid masonry at least 12 inches thick. It must reach 6 inches past the fireplace on all sides. A national cost guide notes that a masonry build may mean pouring a new foundation for the added weight.

The chimney is masonry too, and masonry chimneys must be lined. It stands at least 3 feet above where it passes through the roof. It also rises 2 feet higher than any part of the building within 10 feet. Wood framing keeps 2 inches from the fireplace’s front and sides and 4 inches from its back. Inside the house, framing keeps 2 inches from a masonry chimney, too.

How is a prefab fireplace built?

A prefab fireplace arrives as a complete unit, firebox included. Section R1004 says it must be listed and labeled and installed as its listing says. It must be tested to UL 127, the standard the code names for factory-built fireplaces. Some are sold as zero-clearance fireplaces.

The listing sets how close the framing can come. The hearth extension goes in per the listing, too. It must be easy to tell apart from the floor around it.

The chimney is factory-built as well. It must be listed and labeled, then installed and capped as the maker’s instructions say. For a wood-burning unit in a home, that chimney must meet UL 103. A decorative shroud on top is allowed only when it is listed for that exact fireplace system.

What does each one cost?

National cost guides give these ranges. They are market numbers, not our price list.

  • One guide: a new masonry fireplace, $3,500 to $5,600
  • The same guide: an authentic mason-built brick fireplace, $10,000 or more
  • The same guide: a prefabricated brick fireplace, $2,000 to $3,000
  • The same guide: a prefabricated wood-burning unit, $3,000 to $8,000 to install
  • A second guide: wood-burning fireplaces of all kinds, $2,500 to $30,000 to install
  • The second guide: a new chimney, which can add $4,000 to $8,000 on average

The ranges overlap, and the low masonry figure sits inside the prefab range. Read it with care. The same guide says a mason-built brick fireplace can cost $10,000 or more, above both of its prefab ranges. When you compare prices, check whether each one covers the footing and the chimney.

Which one fits a Florida home?

A masonry fireplace makes sense when:

  • you are building a new custom home or an addition, with the footing and chimney on the plans
  • you want real clay brick or natural stone, with brick arches cut on site over the opening
  • you want a wood fire in a firebrick firebox sized to the room

A prefab unit makes sense when:

  • cost comes first, since prefab ranges in the guides top out lower
  • the room has no place for a masonry footing and chimney

Gas and electric units are another product line. A licensed gas contractor or a retailer handles those, along with inserts and gas logs. For a fire on the patio instead, see our outdoor fireplace kit vs masonry guide.

Who builds what on an indoor masonry fireplace?

An indoor fireplace is part of the house. We build the fireplace; your builder handles the permit and the structure. That includes the framing around it and the roof the chimney passes through.

The code also calls for an outside air supply to the fireplace. The exception is a room whose mechanical ventilation keeps indoor pressure neutral or positive. Put it on the plans with your builder early.

We do not sell or install factory-built units, inserts or gas logs. Our masons build the masonry kind: the firebox, the hearth, the chimney and the brick or stone face.

Where should you start?

If a masonry fireplace fits your plans, see how we build masonry fireplaces inside the home. We look at the plans and the space and give you a quote. Call (407) 702-4316, and we will get back to you.

Frequently asked questions

How much does a masonry fireplace cost?
One national cost guide puts a new masonry fireplace at $3,500 to $5,600. The same guide says an authentic mason-built brick fireplace can cost $10,000 or more. A second guide says installing a chimney can add $4,000 to $8,000 on average. These are market numbers, not our price list.
What are the rules for fireplaces in Florida?
The Florida Building Code, Residential, covers fireplaces and chimneys in Chapter 10. Masonry fireplaces follow Section R1001, and factory-built units must be listed, labeled and tested to UL 127. The building department for your address applies the rules. On a new home or an addition, your builder holds the permit.
How high does a chimney need to be above the roof?
The Florida Building Code says a chimney must stand at least 3 feet above where it passes through the roof. It must also rise 2 feet higher than any part of a building within 10 feet. A factory-built chimney is installed and capped as its maker's instructions say.
Can a prefab fireplace burn wood?
Some are made for wood. One national cost guide prices a prefabricated wood-burning unit at $3,000 to $8,000 to install. The same guide says a zero-clearance or ventless fireplace with no flue likely cannot be converted to burn wood. In a home, the factory-built chimney for a wood-burning unit must meet UL 103.
Can a prefab fireplace have a brick or stone face?
Some come that way: one national cost guide prices a prefabricated brick fireplace at $2,000 to $3,000. Anything built around a factory-built unit has to suit its listing and the maker's instructions, so check those first. A masonry fireplace gets its real clay brick or natural stone face as it is built.
Do you install gas logs or fireplace inserts?
No. We build wood-burning masonry fireplaces. Gas logs, inserts and the gas line to them are work for a licensed gas contractor or a retailer. Your builder can bring one in.
Is this what All American Masonry & Concrete charges?
No. The ranges in this guide are national market numbers, not our price list. We look at the plans and the space and give you a quote for your masonry fireplace. Call (407) 702-4316.
Request a Quote

Get In Touch With All American Masonry & Concrete

Tell us about the project and where it is. Call (407) 702-4316 or fill out the form, and we will get back to you.

  • Call (407) 702-4316
  • St. Cloud, FL · serving Greater Orlando and Central Florida, within about an hour of Orlando
  • A quote after we look at the space · outdoor kitchens, fireplaces, brick and stone

Request a Quote

Tell us what you want built and where the job is. We look at the space and give you a quote.

Call (407) 702-4316