Custom stone and brick for St. Cloud, Orlando and Central FloridaCustom stone and brick in Central Florida
All American Masonry & Concrete
Brick fireplace wall with two side niches and a concrete block core going up on scaffolding under a timber pavilion, brickwork cost
Call (407) 702-4316 Request a Quote

How much does brickwork cost in Florida?

In one national cost guide, a single-layer brick wall runs $15 to $20 a square foot installed. A double-layer wall runs $30 to $40. A second national guide puts the average brick wall at $5,000, in a range of $2,000 to $9,000. That guide says most homeowners spend $10 to $45 a square foot.

These are market numbers, not our price list. We build custom brickwork in real clay brick across Greater Orlando. This guide covers new brickwork: walls, columns, arches and brick veneer. Every price guide here is national.

What does brickwork cost per square foot?

Most brickwork is priced by the square foot of wall face. Columns are priced each.

BrickworkMarket rangeUnitSource
Brick wall, one layer$15 to $20Per square foot, installedFirst guide
Brick wall, two layers$30 to $40Per square foot, installedFirst guide
Brick garden wall$15 to $20Per square footFirst guide
Interior brick wall$8 to $18Per square footFirst guide
Interior wall in full face brick$12 to $18Per square foot, installedFirst guide
Full-size brick veneer on a house$12 to $18Per square foot, installedFirst guide
Ornamental brick column$500 to $1,800EachFirst guide
Ornamental brick column$500 to $2,000EachSecond guide
Structural brick column$2,000 to $6,000EachFirst guide
Structural brick column$2,000 to $7,000 or moreEachSecond guide
Concrete footing under a brick wall$15 to $55Per linear footSecond guide

The interior range starts at $8 because it counts thin brick adhered to an existing wall. Full face brick inside runs $12 to $18. Structural columns carry weight, so they are built with your builder, who holds the permit.

What do brick masons charge for labor?

The two guides disagree on the hourly rate, so the table lists both.

How labor is pricedMarket rangeSource
Per hour$40 to $100First guide
Per hour$70 to $110Second guide
Per square foot of wall$7 to $17First guide
Per 1,000 bricks laid$300 to $800First guide
Per square foot of full-size veneer$5 to $7First guide

Across both guides, that is a span of $40 to $110 an hour. The first guide ties the labor charge to the wall’s thickness, design and location, plus the mason’s skill.

These are labor rates only. Brick alone runs $2 to $6 a square foot in the first guide and $3 to $8 in the second. A single-layer wall takes 6 to 7 bricks per square foot. So 1,000 bricks lay up about 140 to 170 square feet of single-layer wall.

How much does brick veneer cost on a house?

Full-size brick veneer, also called face-brick veneer, adds a single layer of real brick to the outside of a house. The first guide prices it at $12 to $18 a square foot installed. Labor alone runs $5 to $7 a square foot.

That guide prices veneer across the front of a house at $2,000 to $18,000 for 250 to 750 square feet. At the full-size rate, the same 250 to 750 square feet comes to about $3,000 to $13,500. Many homeowners brick only the front or a smaller part of the house, the guide notes.

Weight is the big question. Not all homes can handle the extra weight of real brick, the first guide says. A Brick Industry Association technical note says anchored brick veneer is supported by the foundation. It is tied to the wall behind it with anchors fastened to studs or embedded in masonry. Its weight can sit on an existing or new concrete foundation. Where a foundation wall is strong enough, steel angles can carry it.

Many Florida homes are concrete block under stucco. A Florida trade bureau calls stucco on concrete block one of the most successful and popular building systems in Florida. We lay brick veneer over concrete block walls, and we work with the builder on additions and new custom homes.

What moves the price of brickwork in Central Florida?

One layer or two. Masons call each layer of brick a wythe. In the first guide, two layers cost twice as much per square foot as one. That guide says solid brick walls are structural, with two or more layers.

Wall height. Taller brick walls need a double-brick thickness and structural reinforcements, the first guide says. Work above head height also goes up on scaffolding, which takes time to set. The second guide’s tip is to choose the shortest wall height that does the job.

Pattern work and arches. Intricate designs can push costs to $45 a square foot or higher, the second guide says. Neither guide prices a brick arch, so treat an arch as a cost driver. Arches take extra cutting and setup. A Brick Industry Association note explains the cutting. For even joints, each brick in a jack or elliptical arch differs in size and shape. The arch then sits on temporary shoring, called centering, for at least seven days. We cut our arch pieces on site.

The footing. The first guide’s wall prices assume an existing foundation. A new concrete footing runs $15 to $55 per linear foot in the second guide. That guide calls footings a standard requirement for most exterior brick walls. With us, the brick and the concrete under it come from one company.

Access. Brick and mortar get delivered to the site, then carried to the wall. The second guide says moving brick inside a home takes more time than outdoor work. A long carry from the driveway can push labor up too.

Summer heat and rain. A concrete masonry industry note treats 40 to 90 degrees as normal temperatures for masonry construction. At Orlando International Airport, the normal July high is 92 degrees, in NOAA’s 1991 to 2020 normals. When mortar gets too hot, it can lose water so fast that the cement cannot fully harden. Early drying weakens the bond. So summer work keeps materials as cool as possible, starting with storage in the shade. Unless the work is protected, masonry stops in heavy rain. Hot-weather care and rain days add hours, and hours are labor.

What about brick on outdoor kitchens, fireplaces and patios?

Brick on an outdoor kitchen is priced as part of the kitchen. Our outdoor kitchen cost guide covers that math. We build outdoor kitchens and outdoor fireplaces as full masonry. Each has a concrete block core and a brick or natural stone face.

Brick on the ground is paving. Our mud-set brick pavers are real clay brick set in a mortar bed on a concrete slab we pour first.

How do you get a real number for your brickwork?

Measure the wall’s length and height, and decide on one layer of brick or two. Ask each quote whether the price includes a footing. Ask how it prices pattern work and any arch.

We are based in St. Cloud and build brick walls, columns and arches across Greater Orlando. We look at the space and give you a quote. Call (407) 702-4316.

Frequently asked questions

How much does a brick mason charge per hour?
One national cost guide puts brick labor at $40 to $100 an hour. A second national guide says $70 to $110. The first guide also lists $7 to $17 a square foot, or $300 to $800 per 1,000 bricks laid.
How much does a brick column cost?
Ornamental brick columns run $500 to $1,800 each in one national guide and $500 to $2,000 in another. Structural columns run $2,000 to $6,000 in the first guide and $2,000 to $7,000 or more in the second. A structural column is built with your builder, who holds the permit.
How many bricks does a brick wall need?
One national guide says a single-layer wall takes 6 to 7 bricks per square foot. A 10 by 10 foot wall needs 575 to 1,400 bricks, depending on one layer or two. Labor priced by the brick runs $300 to $800 per 1,000 in that guide.
Does brick veneer cost less than a solid brick wall?
In one national guide, yes. Brick veneer runs $8 to $24 a square foot installed, and a solid brick wall runs $15 to $75. Solid brick walls are structural, with two or more layers, and they are heavier and more expensive to build. Veneer is one layer of brick, tied to the wall behind it.
What mortar is used for brickwork in Florida?
A Brick Industry Association technical note points to Type N mortar for normal brickwork. That includes most anchored brick veneer. It names Type S for stronger brickwork, typically needed in high-wind areas. The wall's design and the building department for your address decide what is used.
Do you need a permit for brickwork in Florida?
It depends on the work and the address, so the building department for your address decides. If you have an HOA, ask whether it reviews exterior changes, and check with both before the work starts. One national guide puts brick wall permits at $100 to $500. Structural columns and brickwork under a roof are built with your builder, who holds the permit.
Is this what All American Masonry & Concrete charges?
No. These are market numbers from national cost guides, not our price list. We look at the space and give you a quote for your brickwork. Call (407) 702-4316.
Request a Quote

Get In Touch With All American Masonry & Concrete

Tell us about the project and where it is. Call (407) 702-4316 or fill out the form, and we will get back to you.

  • Call (407) 702-4316
  • St. Cloud, FL · serving Greater Orlando and Central Florida, within about an hour of Orlando
  • A quote after we look at the space · outdoor kitchens, fireplaces, brick and stone

Request a Quote

Tell us what you want built and where the job is. We look at the space and give you a quote.

Call (407) 702-4316